A Router Mount Kit For the CandCNC Super Z II axis. Comes with the parts you need to mount any conventional 1Hp to 3HP rated hand router body (base removed) to use for CNC routing and rotary cutting. Order Insert rings to fit your router body diameter. This mount is designed to rigidly hold a router with no twisting and minimum deflection. The Super Z II offers heavy duty linear bearings that make the Router Mount Kit a pro level solution
NOTE: If you have the SuperZ II with the Floating Torch Holder (most common) you need to order the Rigid Mount Front plate to use the Router Plate.
NOTE Router Plate also will mount a 1.2KW to 4Kw Air cooled (square) flanged Spindle motor . Rings come off .
CNC Machined in our shop out of aircraft grade aluminum, this Router Mount Kit consists of three main parts:
Machined Router Plate with multiple mounting holes. It has mounting holes for attachment to the Super Z plate in place of the Plasma Holder and/or the Torch Breakaway Bracket. Plate is also drilled and tapped to mount an Air- Cooled 2.2KW import spindle for production work. Vertical bolt patterns of several inches provides multiple mounting options.
Machined Outer Ring Set (2) with locking screws in a bracket that bolts to the Router Plate (above) in several vertical locations to allow for different lengths of routers and higher or lower cutting surfaces.
CNC cut Nylon HDPE locking inserts to fit any router body diameter (order to fit) locks the router securely and resists twisting and deflection.
OPTION
Rigid Mount Front plate CNC Machined in our shop has 6 bolts that lets you remove the Floating Torch Holder (front plate assembly) and mount the Router Plate with the rings and inserts . Swapping from torch to router or back takes minuets
The Kit comes with all of the parts listed except the Rigid Plate . You can also buy any of the parts separately so in case you have several sizes of routers, you can order multiple inserts or even add ring sets. If you just want the Router Back Plate for use with the 2.2KW spindle, then you can order that. The inserts are listed as options to get the correct sizes. NOTE: If you already have the Rigid Mount Front plate (shipped with Super Z II units without the floating torch holder or Breakaway option) then order just the three piece basic kit (Router Plate; Outer Ring Set and appropriate inserts/). The kit above does NOT INCLUDE the Rigid Mount .
SuperZ II Router Mount Kit
$150.00
A Router Mount Kit For the CandCNC Super Z II axis. Comes with the parts you need to mount any conventional 1Hp to 3HP rated hand router body (base removed) to use for CNC routing and rotary cutting. Order Insert rings to fit your router body diameter. This mount is designed to rigidly hold a router with no twisting and minimum deflection. The Super Z II offers heavy duty linear bearings that make the Router Mount Kit a pro level solution
NOTE: If you have the SuperZ II with the Floating Torch Holder (most common) you need to order the Rigid Mount Front plate to use the Router Plate.
NOTE Router Plate also will mount a 1.2KW to 4Kw Air cooled (square) flanged Spindle motor . Rings come off .
Description
CNC Machined in our shop out of aircraft grade aluminum, this Router Mount Kit consists of three main parts:- Machined Router Plate with multiple mounting holes. It has mounting holes for attachment to the Super Z plate in place of the Plasma Holder and/or the Torch Breakaway Bracket. Plate is also drilled and tapped to mount an Air- Cooled 2.2KW import spindle for production work. Vertical bolt patterns of several inches provides multiple mounting options.
- Machined Outer Ring Set (2) with locking screws in a bracket that bolts to the Router Plate (above) in several vertical locations to allow for different lengths of routers and higher or lower cutting surfaces.
- CNC cut Nylon HDPE locking inserts to fit any router body diameter (order to fit) locks the router securely and resists twisting and deflection.
OPTIONThe Kit comes with all of the parts listed except the Rigid Plate . You can also buy any of the parts separately so in case you have several sizes of routers, you can order multiple inserts or even add ring sets. If you just want the Router Back Plate for use with the 2.2KW spindle, then you can order that. The inserts are listed as options to get the correct sizes. NOTE: If you already have the Rigid Mount Front plate (shipped with Super Z II units without the floating torch holder or Breakaway option) then order just the three piece basic kit (Router Plate; Outer Ring Set and appropriate inserts/). The kit above does NOT INCLUDE the Rigid Mount .
Additional information