Versatile CAM software with imports for DXF and SVG (direct from Inkscape or CorelDraw) . Runs on Windows or LINUX. Custom POSTS are available for CommandCNC for Automated Plasma, Plate Marker, Router (with manual tool change) and Oxy-Fuel. Cuts any 2D or 2.5D project. Manual nesting of mixed parts using Row copy and paste, Duplicate and array commands. 2D simulation cut. Has plugins available of Rotary Plasma, Pipe Joint Design and Camera Based auto Scan (Scan Anything™). Included in most CandCNC BUNDLES. IMPORTANT: if you do not have a CandCNC controller (BladeRunner, Plazpak, MP3700 , etc) or you are not using SheetCAM with our controllers we cannot give support or provide custom POSTS for other equipment.
SheetCam is needed to create the job files that CandCNC’s systems need to perform cuts. SheetCam licenses can be used for either Windows or Linux version of SheetCam.
SheetCAM TNG gives you features like:
auto or manual lead-ins/outs, kerf offset.
defined pierce height and initial cut height.
auto touch-off for IHS.
It’s flexible POST language allows easy setups for special functions like scribing (with a separate tool), rotary plasma cutting (with our Rotary Wizard)
Custom POSTS for Automated Plasma, Router and Oxy-Fuel available for CandCNC equipment
SheetCam TNG Software License
$165.00
Versatile CAM software with imports for DXF and SVG (direct from Inkscape or CorelDraw) . Runs on Windows or LINUX. Custom POSTS are available for CommandCNC for Automated Plasma, Plate Marker, Router (with manual tool change) and Oxy-Fuel. Cuts any 2D or 2.5D project.
Manual nesting of mixed parts using Row copy and paste, Duplicate and array commands. 2D simulation cut. Has plugins available of Rotary Plasma, Pipe Joint Design and Camera Based auto Scan (Scan Anything™). Included in most CandCNC BUNDLES.
IMPORTANT: if you do not have a CandCNC controller (BladeRunner, Plazpak, MP3700 , etc) or you are not using SheetCAM with our controllers we cannot give support or provide custom POSTS for other equipment.
Description
SheetCam is needed to create the job files that CandCNC’s systems need to perform cuts. SheetCam licenses can be used for either Windows or Linux version of SheetCam. SheetCAM TNG gives you features like:Related products
Linux Based – Refurbished CommandCNC PC
$200.00 Add to cartRotary Pipe/Tube Cutting Bundle add-on for SheetCAM
$325.00 Add to cartPipeFit Plug-in Standalone Software License
$265.00 Add to cart