Menu
CandCNC
  • Home
  • Plug-n-Run Systems
    • Plasma Systems
      • Up to 100LB Gantry – STEPPER
      • Up to 200LB Gantry – STEPPER
    • MP3700
    • PlazPak Stepper Systems
    • Router/Mill Systems
      • BladeRunner Router/Mill
      • BladeRunner Servo
  • Discount Bundles
  • Support
    • Knowledgebase
    • Support Forum
    • Videos
    • Sales and Warranty
    • Downloads
    • Manuals
  • RMA
  • My Account
    • Logout
  • Cart
  • Contact
  • Coupons
Close Menu
Close Cart
Home / Computer and Software / Software / Rotary Pipe/Tube Cutting Bundle add-on for SheetCAM

Rotary Pipe/Tube Cutting Bundle add-on for SheetCAM

$325.00

SUMMER SALE!
A complete solution for doing rotary plasma cutting, marking and cutting.   Bundled with a Pipe Joint Design tool that “draws”  complex Header and Branch holes and copes.  Options to add the hardware for a 5th axis upgrade to Bladerunner and Plazpak systems. Includes Rotary Plasma Plugin, Pipefit Round Pipe Joint Design plug-in, Rotary POST Processor for CommandCNC, and PDF manual with tutorials.

SKU: 70-01-050-01 Categories: Rotary Cutting, Software

5th Axis Upgrades for Rotary Cutting

5 axis expansion module for all Bladerunner systems and Bundles. Adds an additional axis for doing rotary cutting

  • Description
  • License Request Form
  • How to Install

Description

This is an all-in-one solution for doing rotary cutting on round pipe and tubing.  If your system does not have a 5th axis/motor you will need to upgrade it using one of our 5th axis solo kits. 
This Bundle Includes:
  1. SheetCAM Rotary Plasma Plugin (license)
  2. Pipefit™ Pipe Joint Design Tool (CandCNC Plugin for SheetCAM) Installer for SheetCAM for LINUX
  3. Custom POST for rotary cutting using CommandCNC™
  4. Tutorials
  5. Sample Projects

When you get the bundle it will include a TRIAL Demo license for Pipefit™  which, after it is installed on the same computer as CommandCNC and SheetCAM for LINUX,  a full unlimited license code will be issued when the Demo License ID and the MachineID is sent to this Link. See the How to Install tab for more info.

License Request Form


Pipefit Demo Request

This is the Pipefit Demo Request Form, Please make sure all fields are filled out. You will be sent an email with the installer to the email address in the form with the Pipefit installer. PipeFit is a pipe joint design plugin for SheetCAM TNG You need to have a licensed copy of SheetCAM TNG on the PC its going to be loaded on. Please be aware Pipefit only works with SheetCAM TNG for LINUX and will not run on Windows.

Only countries listed will be sent Demos

We do not provide demos to any country not listed in the Country Drop Down Menu

How to Install

1.  Request a Demo License using the form on the License Request form.   It sends an email to our tech department and you will be sent an Install Package . Make sure you include your e-mail address.  You MUST install the demo plugin before you can request the full license even if it has been purchased
2.  When you get the Install Package it will be in a ZIP format ,  You need to copy the ZIP file to your Downloads folder in the LINUX PC and unzip (extract) there,  not outside the folder.   If the Pipefit installer is zipped in the master file it needs to be extracted too. 
3. There is the actual installer for Pipefit , a Rotary POST for SheetCAM and some PDF documents on how to use the Pipefit.
4.  After the Pipefit Installer finishes you can open SheetCAM and the OPTIONS/PLUGIN OPTIONS and scroll over and find the Pipefit tab.  It will let you install the Pipefit Demo License using the Install License button.  Once the Demo License is installed,  the tab will show it (license id) and how many Projects you have left out of the five.   You will need the license ID and the Machine ID if you want to buy a full unlimited license using the License Request Form.
5.  If you purchased the bundle with the SheetCAM Rotary Plasma Plugin (not Pipefit) then you will have a license number for that that you can enter into the Rotary Plasma Tab in the Plugin Options.  Rotary Plasma Plugin is REQUIRED to run the rotary cutting with or without Pipefit
6.  Copy the Rotary Post (scpost) file to the SheetCAM-CandCNC/Posts folder . Use the IMPORT POST in SheetCAM Options/Machine/Post Processor to go get that Post and import it to SheetCAM.

Search Products

Store Categories

  • Store Home
  • CNC Orphan Rescue Kits
  • Discount Bundles
  • Accessories
  • Plug-n-Run Systems
  • Connection Kits
  • System Upgrades
  • Replacement Parts
  • Rotary Cutting
  • Motors
  • Computers and Software

Cart

Back To Top
CandCNC
All content copyrighted Fourhills Designs & CandCNC 2008-2020. No unauthorized reproduction. All rights reserved. CandCNC is a divison of Fourhills Designs
1305 Henry Johnson Rd Whitewright, TX 75491 USA.