Completely control your CommandCNC™ CNC controller remotely using reliable WIFI connectivity. This is NOT just a jog pendant with a few action buttons. . its a true remote console application that lets you setup, calibrate, position, load g-code, run code, adjust DTHC parameters on the fly, control up to 6 outputs and see the status of the machine. Designed to let you control your plasma , router or oxy-fuel CNC table out of the palm of you hand and free you from the keyboard and monitor. 8 way jog lets you jog slow , medium or fast to any spot and set you work zeros . Do a manual touch off . Put your cut files in the linuxcnc/nc_files folder on the control PC and scroll though and pick any one to display the g-code or to load and run . No more running back and forth tot he console . Run. Pause and Stop G-code . ESTOP the machine . move in continuous or incremental mode using precise distance steps , all from the tablet.,. Over 50 functions at your finger tips.. 3D look buttons change color on select .
The RC400 comes preloaded on a 7″ tablet (included) with a high resolution 600X 1024 display Available accessories include a protective silicon “glove” , a belt mounted or strap held case with clear front and a battery expanding module for hours more usage per charge.
Don’t have WIFI in your your shop? Worried about the complexity of setting it up? Then click the WIFI setup tab. If you can enter two numbers in two places you can setup a simple point to point WIFI network!