|Model, Edit, View, and Toolpath to G-Code in one application.
Just type in the parameters such as Header OD, Branch OD, Wall Thickness, Joint Angle, X and Y offsets and Rotation Angle.
The software DRAWS IT FOR YOU and shows you the joints and the cuts in both 3D and 2D.
Add as many joints to a Header with different sized pipes and at different angles or rotations and then cut the header or cut each branch as a separate JOB.
|Unique PROJECTS method lets you design and save any joint or set of joints then OPEN, EDIT and SAVE a new Project from the results. Setup libraries of common pipe sizes and joints and reload them to build new designs View any Project in 3D and rotate to see the joints, or in 2D to show you what the PART will look like in SheetCAM. Turn any joint into a PART for SheetCAM to use with the click of a SINGLE BUTTON. Uses familiar SheetCAM Workspace and existing Plasma Toolsets. Fully compatable with DCC and TAPadvanced automated plasma cutting options..|
POP-UP Help Windows on each type of joint shows you the names of each parameter.Supports multiple types of joints like BEVEL, MITER, Y and DEAD END CAP. On Surface or Through Hole .
FREE! * SHEETCAM POSTS for CommandCNC™
Users with DTHCIV can take advantage of automatic settings for your plasma (DCC) and if you have the Hypertherm RS485 serial option and the HyT-Connect RS485 SIIM Kit you can use full TAP. A good THC is essential to doing rotary cutting due to the variations in pipe roundness and exact size.Sample Project Files for SheetCAM TNG. Take your choice of using a 5th Axis as either A or B.. No swapping over plugs or motors on a plasma table with a rotary axis. Switch back and forth from flat to rotary in seconds, or build a dedicated pipe cutter. * You can get a trial version of Pipefit
|See Rotary Bundle for combo deal with Rotary Plasma Plugin (required)|