View cart “PN200 Hand Controller” has been added to your cart.
Super Z II Axis Assembly with Floating Torch Holder
$595.00
NEW IMPROVED SUPER Z II . Best Multi- use Z you can buy! A carefully engineered and well built multipurpose Z axis with outstanding features. NOTE: Shown with Z motor that is part of a complete system Super Z does NOT include motor If ordered with a system Z motor is mounted and tested
Fast, smooth, accurate operation using precision components
Vibration free at all speeds
Heavy Duty componets for use with routers and spindles.
Built in Ohmic Sensing and mechanical backup sensors
All Solid State Sensors
50% Faster Up and Down Speeds
Built for long life and easy repair and service.
Full 6.5″ stroke
NOTE: See the SPECIAL ORDERING INFORMATION tab below on ordering limitations
Welcome to the NEW improved Super Z multi purpose axcess. Just like its paerent, the Super Z it offer the same quality features:
Be strong and rigid with precision slides and bearings. No wobbly cuts at any speed.
Have features that make it perfect for all types of cutting and tools (plasma, router, plate marker).
Have fast, smooth and accurate operation.
Offer a Floating Torch Holder
Offer a built-in Ohmic Sensor, backup mechanical Z, and Z overrun limit sensors.
Have sufficient stroke for most gantry types.
Have optional Break-Away torch plate with sensors for E-stop.
Be easy to hook up to any Bladerunner/Core/Plazpak system. Single cable connection.
Work with existing 23 frame 620 oz-in high torque steppers.
Then we ADDED these things to make it truely the BEST Z axis on the market
Even stronger with dual 15mm precision linear slides and 4 bearings ( not just two like most).
Stroke increased from 4.5″ to 6.5″
Floating Torch Holder is a seperate sub-assembly with seperate precison slide.
Upgraded to our new FT-02 Ohmic Sensor with the added input options for gantry mounted homes.
Support for 12 V sensors.
Support for a Dual Breakaway or Collision Sensor setup. Internal logic trips if EITHER sensorg goes active.
New single 12 pin to 12 pin cable for the new REV 17 Table I/O on G5 Bladerunners. (also works with 12.3 and 12.6 with matching cable).
All Solid State Sensors. No more mechanical switches.
Single wiring harness (replacable) .
New front cover plate helps protect ballscrew and slides
Floting holder coms off and allows Router Mount swap out in minutes
Option plate for Water and Air cooled spindles
Side connection points for Plat Marker Subplate
:
Additional information
Weight
20 lbs
Dimensions
14 × 8 × 4 in
Specifications
FEATURE
VALUE
Weight
18.7lbs 8.48kg
Stroke
6.5" (165mm)
Motor Weight (avg)
4.0 lbs 1.8 kg
Height (no motor)
Height (w/motor)
13.5 in 342mm
17.5in 444.5mm
Leadscrew
Precision Ballscrew 16mm X 5mm (pitch)
Slides
15mm square rail presision linear X 2
Linear Bearings
15mm dual linear bearings both sides (X4)
Torch Holder Bracket
Dual Compression Loops 1.375 diameter
Floating Travel
.525 in 13,0mm
Connector
Single 12 pin circular threaded sleeve type.
Cable
Prewired 12 cond circular to matching connectors for TABLE I/O (15ft)
OPTIONS
Breakaway Torch Mount
Longer 12 pin cable
IMPORTANT ORDERING INFO
The SuperZ II axis product is ONLY AVAILABLE TO OWNERS OF CandCNC Control Electronics purchased in the last 24 months . If you have a BladeRunner, Plazpak or Special Bundle system from CandCNC you can purchase a SuperZ II at the posted price. The unit has a built-in FT-02 Ohmic Sensor. It will replace the FT-01 Feather Touch Ohmic Sensor IF YOU HAVE one. There is no refund on the old FT-01. If you bought your system from a CandCNC OEM or used from another owner, you MUST contact us prior to ordering the product to confirm it meets the above criteria. NOTE: the SuperZII is compatible with our newer LINUX based CommandCNC systems. taht have the REV 12.3 and 12.6 table I/O cards OR the new Rev 17 table i/o on the G5 Bladerunners
Super Z II Axis Assembly with Floating Torch Holder
$595.00
NEW IMPROVED SUPER Z II . Best Multi- use Z you can buy!
A carefully engineered and well built multipurpose Z axis with outstanding features.
NOTE: Shown with Z motor that is part of a complete system Super Z does NOT include motor
If ordered with a system Z motor is mounted and tested
NOTE: See the SPECIAL ORDERING INFORMATION tab below on ordering limitations
Description
Welcome to the NEW improved Super Z multi purpose axcess. Just like its paerent, the Super Z it offer the same quality features:Then we ADDED these things to make it truely the BEST Z axis on the market
- Even stronger with dual 15mm precision linear slides and 4 bearings ( not just two like most).
- Stroke increased from 4.5″ to 6.5″
- Floating Torch Holder is a seperate sub-assembly with seperate precison slide.
- Upgraded to our new FT-02 Ohmic Sensor with the added input options for gantry mounted homes.
- Support for 12 V sensors.
- Support for a Dual Breakaway or Collision Sensor setup. Internal logic trips if EITHER sensorg goes active.
- New single 12 pin to 12 pin cable for the new REV 17 Table I/O on G5 Bladerunners. (also works with 12.3 and 12.6 with matching cable).
- All Solid State Sensors. No more mechanical switches.
- Single wiring harness (replacable) .
- New front cover plate helps protect ballscrew and slides
- Floting holder coms off and allows Router Mount swap out in minutes
- Option plate for Water and Air cooled spindles
- Side connection points for Plat Marker Subplate
:Additional information
Specifications
Height (w/motor)
17.5in 444.5mm
Longer 12 pin cable
IMPORTANT ORDERING INFO
The SuperZ II axis product is ONLY AVAILABLE TO OWNERS OF CandCNC Control Electronics purchased in the last 24 months . If you have a BladeRunner, Plazpak or Special Bundle system from CandCNC you can purchase a SuperZ II at the posted price. The unit has a built-in FT-02 Ohmic Sensor. It will replace the FT-01 Feather Touch Ohmic Sensor IF YOU HAVE one. There is no refund on the old FT-01. If you bought your system from a CandCNC OEM or used from another owner, you MUST contact us prior to ordering the product to confirm it meets the above criteria. NOTE: the SuperZII is compatible with our newer LINUX based CommandCNC systems. taht have the REV 12.3 and 12.6 table I/O cards OR the new Rev 17 table i/o on the G5 BladerunnersMore Details
Inside Look
Related products
PWM IIA module
$110.50 Add to cartPN200 Hand Pendant w/Hub
$228.00 Add to cartPN200 Hand Controller
$185.00 Already in cart